Live pair

Swap USDT (Avalanche) to SAN (ERC20)

Exchange Tether (AVAX C-CHAIN) on Avalanche for Santiment Network Token on ERC20 at a live or locked rate. One deposit, one payout — no account and no KYC in between.

  • 11.2275SAN per USDT, live
  • 0.753073minimum, in USDT
  • 10-60minutes, end to end
  • Yesrate can be locked
  1. USDTon Avalanche
  2. BTCSwapfixed or floating
  3. SANon ERC20
Payout network fee
1.634 SAN

ERC20 charges this to move your coins. It is not our fee, and it is already inside the amount you are quoted.

Our fee
Inside the rate

No line added at the end, no percentage on top. What the quote says is what settles.

Rate type
Fixed or floating

Lock the price now and beat the clock, or follow the market until your deposit confirms.

Identity check
None

No account, no document, no limit tied to who you are — at any amount on this pair.

Follows the market until your deposit confirms.

Min

221.6453

1 USDT ≈ 11.0823 SAN

Payout network fee 1.634 SAN
Estimated arrival 10-60 min

How to

How to swap USDT (Avalanche) to SAN (ERC20)

Three steps, and only the second one involves your wallet.

Start this swap
  1. 01 you

    Enter the amount and your SAN address

    Type what you want to send, then paste the address that should receive the SAN. We check it against ERC20 before anything is created.

    Minimum
    0.753073 USDT
    SAN address
    starts with 0x — 42 characters
    Identity check
    none
  2. 02 you

    Send your USDT to the deposit address

    We generate an address for this exchange only. Send from your own wallet, whenever you are ready — nothing moves before you do, and there is no account to fund first.

    Deposit network
    Avalanche
    Transactions
    one, from your wallet
    Rate
    fixed or floating
  3. 03 automatic

    Receive your SAN

    Once Avalanche confirms your deposit, the exchange and the payout take seconds. The SAN goes straight to your address — no balance, no withdrawal step.

    Arrival
    10-60 min
    Lands on
    ERC20
    Left with us
    nothing

What you actually get

USDT to SAN, at four sizes

The payout network fee is a fixed amount, so the smaller the swap, the more of it that fee eats — which is why this table exists instead of one headline rate.

USDT (Avalanche) to SAN (ERC20) conversion at several amounts
You send You get Effective rate Cost of size
5 USDT 52.4968 SAN 10.4994 −6.49%
20 USDT 221.6453 SAN 11.0823 −1.29%
50 USDT 559.9422 SAN 11.1988 −0.26%
200 USDT 2,245.51 SAN 11.2275 best rate on this pair

Quoted by the desk at , refreshed every few minutes. The percentage compares each line's effective rate with the best one in this table — it is the price of swapping small, not a fee we charge.

The two sides

Tether (AVAX C-CHAIN) and Santiment Network Token: what you send, what you receive

You send: Tether (AVAX C-CHAIN)

Tether (USDT) is a stablecoin designed to track the US dollar, issued on many blockchains at once. The network matters as much as the ticker: USDT on TRC20, ERC20 or BEP20 are not interchangeable at the address level. More about Tether.

On this pair it moves over Avalanche — an address there starts with 0x — 42 characters.

USDT also exists on other networks — different addresses, not interchangeable: Aptos, Arbitrum, AssetHub, BEP20, Celo, ERC20.

You receive: Santiment Network Token

On this pair it moves over ERC20 — an address there starts with 0x — 42 characters.

SAN lives on a single network here, so there is no wrong-chain version of it to confuse it with.

FAQ

USDT to SAN, in short

Using it

What is the minimum USDT to SAN swap?

0.753073 USDT right now. The desk sets it live and it moves with the ERC20 network fee — below it, that fee would eat the swap. There is no fixed maximum on this pair.

Which address do I need to receive SAN?

A ERC20 address you control — it starts with 0x — 42 characters. SAN exists on several networks; an address from another one looks valid and the coins would be unrecoverable, so we check it against ERC20 before creating anything.

How long does USDT to SAN take?

Around 10-60 minutes end to end, as forecast by the desk right now. Most of that is Avalanche confirming your deposit — the exchange and the payout themselves take seconds.

Money & privacy

Can I get a guaranteed amount of SAN?

Yes — pick Fixed in the module. The rate is locked when the exchange is created, and a countdown starts for your deposit.

What does it cost?

Two things come out: the ERC20 network fee for sending your payout — 1.634 SAN right now — shown on its own line, and our margin, which is already inside the rate. Nothing is added after you confirm.

Do I need an account or ID?

No. There is no account to create and we never ask for identity documents, at any amount. The one case where a swap can be held is spelled out in the AML policy rather than hidden.

Is a USDT to SAN swap traceable?

On-chain, yes: Avalanche and ERC20 are public ledgers, so the deposit and the payout are visible to anyone, like any other transaction on them. What nobody can link them to is an identity: there is no account, no document and no request log here — the privacy policy names the only parties in the path.

What if the swap cannot complete?

Every order takes an optional refund address, and it is worth filling in. If the exchange cannot go through — a deposit under the minimum, a pair that stops being quoted, or the one documented case of a flagged deposit where the law allows a return — the deposit goes back to that address, minus what the network charges to send it; we charge nothing for a refund. Without a refund address, a return has to be arranged by hand through support. The order page tells you which situation you are in; nothing is decided silently.

Swap USDT for SAN

1 USDT ≈ 11.2275 SAN · no account, no identity check.

Start now